You are here

Home » Full Form of BPO - Also KPO

Full Form of BPO - Also KPO

Primary tabs

BPO - (Business process outsourcing).

Other full form in BPO are also searched world wide, so let us find other meaning of the given terms.

So check it out other similar terms on this site.

While KPO stands for knowledge process out sourcing

Tags:

Explore more Information

  • Full Form of EMI

    EMI - (Equated monthly installment).

    Other full form in EMI are also searched world wide.

    so let us find other meaning of the given terms.

    So check it out other similar terms on this site. 

  • Process Validation stages continued process verification

    Third stages in Process Validation is Continued Process Verification, Some points in process validation during continued process verification are as follows, So let us see one by one all the points:

    The main goal of continued process verification in process validation is to ensure that the process remains in a state of control during manufacturing of commercial products.

    The data is collected and evaluated in order to determine process variability.

  • Process Validation Stages process design

    In Process Validation the first stage out of three stages is Process Design. Following are some of the points which are taken into consideration during process design. So let us check it out one by one:

    To design process follow good manufacturing practices.

    Uses scientific principles as well as scientific methods.

    Conduct the internal review , the document decisions and the justification of the controls.

    Find out critical quality attributes during process design.

    Critical material attributes are defined.

  • Process Validation Stages process qualification

    During Process validation: The second stage is process qualification Some of the points which are discussed during process qualification are as follows , so let us check it out points one by one.:

    The main aim of process qualification is to determine whether the process which is designed is capable of reproducible commercial manufacture or not.

    Design of the utility and the qualification of the equipment are taken into account during process qualification.

    Process performance qualification in this stage.

  • Process Validation stages continued process verification one

    About Process Validation, the third stage is continued process verification, Some more information about process validation in continued process verification are as follows:

    The variation in the continued process verification can be detected by assessment of various documents.

    By complaints of any defects.

    By checking out of specification records or process parameters.

    Checking deviation reports.

    By observing variation in the process yield.

    By checking batch records.

    Checking records of incoming materials.

  • Process Validation Stages process design two

    In Process validation the first stage that is Process design stage have some points which are taken into account. Some of them which are taken into consideration are as follows:

    Process control should address variability such as:

    During the process design the control to reduce the input variation and the control to adjust for input variation are taken into account during manufacturing.

    Controls may also consist of about the equipment monitoring at significant processing point and also control on material analysis.

  • Process Validation Stages process qualification two

    In the Process Validation during second stage that is process qualification some more points are taken into account which are  discussed below. So let us see some points one by one:

    During process performance qualification the actual facilities, utilities and equipment are checked whether they are qualified or not.

    The personnel operating various equipment are trained or not is checked.

    The  procedure which are performed are as per standard procedure is verified and checked.

  • Process Validation Stages process design one

    In Process Validation as we know that first stage is process design, Some of the points which are discussed during the process design are as follows , so let us check it out one by one.

    Use Design of experiment (DOE) to develop the process by different factors such as :

    By Revealing relationship between the various variable inputs such as characteristics of components or process parameters  and between the resulting outputs such as process material, intermediate or the final product.

  • Full Form of RAC

    RAC - Reservation Against Cancellation

    Other full form of RAC are Royal Automobile Club, Rent a Car and Religious Action Center.

    so let us find out other meaning of the given terms.

    Check it out other similar terms on this site. 

  • Full Form of NA

    NA - Not Applicable

    Other full form of NA are Nucleic Acid, North America,National Association and Sodium.

    so let us find out other meaning of the given terms.

    Check it out other similar terms on this site. 

  • Full Form of RCT

    RCT - Root Canal Treatment

    Other full form of RCT are Randomized Clinical Trials, Reverse Conducting Thyristor and Royal Corps of Transport.

    so let us find out other meaning of the given terms.

    Check it out other similar terms on this site. 

  • Process Validation Stages process qualification report excution

    In Process Validation the execution of process qualification begins after the approval of the protocol, Following are some of the points regarding execution and preparation of report during process qualification.

    Execution will start of begins after the approval of the protocol.

    All points mentioned in the protocol are to be followed.

    If the points mentioned in protocol is not followed then proper justification is required.

    Follow the commercial manufacturing process and the routine procedures.

  • Full Form of NAV

    NAV - Norton Antivirus

    Other full form of NAV is Net Asset Value, Navigation and Network Allocation Vector.

    so let us find out other meaning of the given terms.

    Check it out other similar terms on this site. 

  • Process Validation Stages process qualification protocol

    During Process Validation the protocol of process qualification is also prepared, following are some of the points which are included into protocol of process qualification, so let us check it out some points:

    The manufacturing condition including processing limits, the operating parameters as well as the components used such as raw materials are included in protocol.

    The sampling plan with complete details of the number of sampling points, frequency of sampling of each unit are to be mentioned in protocol.

  • Process Validation Stages

    Process Validation is divided into three stages, So let us check it out one by one. Following are the three stages.

    Stage I - Process Design: With the knowledge of Scale up studies and the prior knowledge which is gained through development, The commercial manufacturing process is defined during this stage of process design.

    Stage II - Process Qualification: After defining process design, it is evaluated in this stage to determine whether the process is capable of reproducible commercial manufacturing or not.

  • Full Form of MBBS

    Bachelor of Medicine, Bachelor of Surgery (MBBS).

    Other full form in MBBS are also searched worldwide.

    So let us find other meaning of the given terms. So check it out other similar terms on this website.

    It (Degree) is awarded upon graduation from medical school in medicine and surgery by universities.

    These are two different degrees ,  they are usually treated as one and both are awarded together known as MBBS.

  • SOP to WL terms

    The List of Abbreviations used in Pharmaceutical Industry

    Check out more information of related terms

    The last chapter of the list of abbreviations used in pharmaceutical industry is chapter number ten. Other important meaning and terms are given here. so check out all the terms one by one.

  • ICAH to LDPE terms

    The List of Abbreviations used in Pharmaceutical Industry

    Check out more information of related terms

    Get some more about the list of abbreviations used in pharmaceutical industry in chapter Six. Following are some of the ueful terms which are used in pharma industry.

  • Process Validation parameters

    Parameters of Process Validation for successful validation of any process are discussed here. Some of the key parameters in process validation are as follows, so let us check it out one by one.

    The knowledge and the information about the product and the process is very necessary.

    Understanding of the source of variation is required for successful process validation.

    One must be aware about the impact of the variation on the process and ultimately on the products which is being manufactured.

  • Process Validation Stages process qualification one

    In Process Validation the second stage that is process qualification , the design of the facilities and the qualification of the equipment and the qualification of the utilities are very important. Some of the points regarding design and qualification are as follows:

    During the qualification of th utilities and the equipment, the construction materials, the operating principle and the performance characteristics are very important.

  • NDA to PLC terms

    The List of Abbreviations used in Pharmaceutical Industry

    Check out more information of related terms

    In Chapter Eight of the list of abbreviations used in pharmaceutical Industry there are some terms used in research and development activities related to pharma industry.

  • CFR to EIR terms

    The List of Abbreviations used in Pharmaceutical Industry

    Check out useful information on related terms.

    The third chapter of the List of abbreviations used in pharmaceutical Industry is as follows so let us know some of the terms used in pharma.

Trending Posts

Full Form of DSLR

DSLR : Full form can be defined in different ways which are listed below, so check it out different full form of term DSLR.

The full form of DSLR is Digital Single Lens Reflex camera. They are also know as digita SLR. 

The reflex design used in this type of camera is the only difference between the digital camera and the DSLR. This type of DSLR are generally auto focus camera based on phase detection

Education

List of related Posts - Importance of Education. Some more information on education are given below. So let us check it out one by one to know more about education.

What are the uses of FAX machine ?

Some of the points on the uses of fax machine are given below , So let us check it out full details to know more about FAX machine.

  1. Fax machine can be used to print various documents.
  2. The fax machine can also be used as a photocopier in as office.
  3. FAX machine is one of the fast and  effective way to send as well as receive documents in office compare to postal mail or other types delivery service.

You might also like the Full Form of FAX machine

Educational Research

Educational Research is the field of scientific study which starts with the process of identifying a research problem. Next is the process of reviewing various literatures available begins. Various data are collected from all the available resources and the information is analyzed and studied. After proper understanding of the given issue or topic , a report is generated which is evaluated and can be used in education.