You are here

Process Validation Types

Types of Process Validation: There are mainly four types of process validation. Following are some of the types of process validation so let us see all types one by one:

Prospective process validation

Retrospective process validation

Concurrent process validation

Revalidation

Prospective process validation: "Documented evidence - Validation carried out based on the pre-planned protocol"

Retrospective process validation: "Documented evidence - Validation carried out based on the analysis and review of the historical data"

Concurrent process validation: "Validation carried out based on the information which is generated during the actual implementation at the time of production" 

Revalidation: "Validation process is repeated to check the performance of process by reviewing various performance data"

Explore more Information

  • Process Validation Types Concurrent validation

    Third type of process validation is concurrent validation which is also performed. Some of the points about concurrent validation are as follow , so let us see one by one:

    Concurrent validation is performed based on the data which is generated at the time of production.

    Validation carried out on the bases of the actual report generated during production.

    Critical process parameters and the end products are monitored during concurrent validation.

    The process parameter are checked for each and every ongoing batch.

  • Process Validation Types Prospective validation

    Types of Process validation:Out of four types prospective validation is one of them. Some points regarding prospective validation are as follows , so let us check it out one by one:

    In prospective validation process the validation is carried out based on the pre planned protocols.

    Prospective validation is carried out at new process at new manufacturing facility.

    Before pharmaceutical production at commercial level, prospective validation is carried out.

    During prospective validation the input resources are clearly defined and specified.

  • Process Validation Types Retrospective validation

    Retrospective validation is the second type of process validation, some of the points regarding the retrospective validation are given below , so let us check it out one by one:

    Retrospective validation is the documented evidence in which the process validation is carried out based on the historical data.

    Validation of facilities, process, or processes are carried out based on the available historical data or reports.

    This type of approach is rarely used today.

  • Process Validation

    Process validation: It can be defined as the documented evidence which provides a high degree of assurance that the process which is going to be performed will consistently produce a product , meeting its pre determined specifications and all the quality attributes.

    Process Validation is classified into four types which are as follows:

    Prospective Validation

    Retrospective Validation

    Concurrent Validation

    Revalidation

    Process Validation is divided into three stages which are  as follows:

    Process Design - Stage I

  • Process Validation Types Revalidation

    Fourth type of process validation is Revalidation. It is performed to check the performance of the various process parameters, some of the points regarding revalidation are as follows. So let us have a look on revalidation:

    Any part of process or entire process parameters are validated in order to check the performance of the process parameters.

    To maintain the validated status of equipment, facilities, or manufacturing process , revalidation if often carried out.

  • Process Validation stages continued process verification

    Third stages in Process Validation is Continued Process Verification, Some points in process validation during continued process verification are as follows, So let us see one by one all the points:

    The main goal of continued process verification in process validation is to ensure that the process remains in a state of control during manufacturing of commercial products.

    The data is collected and evaluated in order to determine process variability.

  • Process Validation Stages process qualification protocol

    During Process Validation the protocol of process qualification is also prepared, following are some of the points which are included into protocol of process qualification, so let us check it out some points:

    The manufacturing condition including processing limits, the operating parameters as well as the components used such as raw materials are included in protocol.

    The sampling plan with complete details of the number of sampling points, frequency of sampling of each unit are to be mentioned in protocol.

  • Process Validation parameters

    Parameters of Process Validation for successful validation of any process are discussed here. Some of the key parameters in process validation are as follows, so let us check it out one by one.

    The knowledge and the information about the product and the process is very necessary.

    Understanding of the source of variation is required for successful process validation.

    One must be aware about the impact of the variation on the process and ultimately on the products which is being manufactured.

  • Process Validation stages continued process verification one

    About Process Validation, the third stage is continued process verification, Some more information about process validation in continued process verification are as follows:

    The variation in the continued process verification can be detected by assessment of various documents.

    By complaints of any defects.

    By checking out of specification records or process parameters.

    Checking deviation reports.

    By observing variation in the process yield.

    By checking batch records.

    Checking records of incoming materials.

  • Process Validation Stages process design one

    In Process Validation as we know that first stage is process design, Some of the points which are discussed during the process design are as follows , so let us check it out one by one.

    Use Design of experiment (DOE) to develop the process by different factors such as :

    By Revealing relationship between the various variable inputs such as characteristics of components or process parameters  and between the resulting outputs such as process material, intermediate or the final product.

  • Process Validation Stages process qualification report excution

    In Process Validation the execution of process qualification begins after the approval of the protocol, Following are some of the points regarding execution and preparation of report during process qualification.

    Execution will start of begins after the approval of the protocol.

    All points mentioned in the protocol are to be followed.

    If the points mentioned in protocol is not followed then proper justification is required.

    Follow the commercial manufacturing process and the routine procedures.

  • Process Validation Stages process qualification

    During Process validation: The second stage is process qualification Some of the points which are discussed during process qualification are as follows , so let us check it out points one by one.:

    The main aim of process qualification is to determine whether the process which is designed is capable of reproducible commercial manufacture or not.

    Design of the utility and the qualification of the equipment are taken into account during process qualification.

    Process performance qualification in this stage.

  • Process Validation Stages process design

    In Process Validation the first stage out of three stages is Process Design. Following are some of the points which are taken into consideration during process design. So let us check it out one by one:

    To design process follow good manufacturing practices.

    Uses scientific principles as well as scientific methods.

    Conduct the internal review , the document decisions and the justification of the controls.

    Find out critical quality attributes during process design.

    Critical material attributes are defined.

  • Process Validation Stages process design two

    In Process validation the first stage that is Process design stage have some points which are taken into account. Some of them which are taken into consideration are as follows:

    Process control should address variability such as:

    During the process design the control to reduce the input variation and the control to adjust for input variation are taken into account during manufacturing.

    Controls may also consist of about the equipment monitoring at significant processing point and also control on material analysis.

  • Process Validation Stages process qualification two

    In the Process Validation during second stage that is process qualification some more points are taken into account which are  discussed below. So let us see some points one by one:

    During process performance qualification the actual facilities, utilities and equipment are checked whether they are qualified or not.

    The personnel operating various equipment are trained or not is checked.

    The  procedure which are performed are as per standard procedure is verified and checked.

  • Process Validation Stages process qualification one

    In Process Validation the second stage that is process qualification , the design of the facilities and the qualification of the equipment and the qualification of the utilities are very important. Some of the points regarding design and qualification are as follows:

    During the qualification of th utilities and the equipment, the construction materials, the operating principle and the performance characteristics are very important.

  • Process Validation Stages

    Process Validation is divided into three stages, So let us check it out one by one. Following are the three stages.

    Stage I - Process Design: With the knowledge of Scale up studies and the prior knowledge which is gained through development, The commercial manufacturing process is defined during this stage of process design.

    Stage II - Process Qualification: After defining process design, it is evaluated in this stage to determine whether the process is capable of reproducible commercial manufacturing or not.

  • Types of chromatography

    There are various different types of chromatography which are used today in different industries and in day to day life.

    Before going into detail let us check it out the definition of the chromatography.

    The chromatogaphy is the separation of a component from of complex mixture of substance.

    Types of component, functional group or structure can be identified with the help of chromatography.

    List of some of the equipment are as follows:

    Gas chromatography

    Liquid chromatography

    Solid chromatography

    Liquid-liquid chromatography

  • What are the Types of Friction ?

    What are the Types of Frictions ? Let us check it out some of the types of friction to learn more about friction. This type of frictional force is responsible for wear and tear of two bodies, Following are some of the types:

    Types of Friction are:

    1. Static Friction
    2. Kinetic Friction
    3. Rolling Friction
    4. Fluid Friction

    Static Force comes into action when a body is forced to move along a surface but the movement of the body does not starts. Example Pushing on a wall

  • Types of Coal

    Coal is a multifaceted resource which differs in composition even inside the same deposit. There are four different types or ranking based on various levels of coal with differences in energy output as a result of increased temperature,pressure & time

    Lignite is a brownish-black coal with great moisture and ash content and the lowest heating value of the four types of coal. It is used for generating electricity.

  • Different Types of Ants

    There are Different Types of Ants present on the Earth, So let us check out some of the  information on various kinds of Ants to know more about it. An Ant is one type of insect, Ants are small animals (Insects) and they are likely to be found in an anthill. Ants are usually social insects and usually lives in a complex social colony with one or more breeding queens, ants are very strong.

  • What are environmental benefits of Recycling ?

    There are several environmental benefits of recycling. Let us check it out some of the points of recycling to know more about recycling.

    The process of recycling helps to reduces noxious waste in landfills. Recycling also helps to promote environments sustainability. By this entire process it is possible to diminish the demands of raw materials. Ecological degradation can also be prevented by the process of recycling, 

  • How Recycling Saves Energy?

    When we manufacture new products from virgin materials, more energy is consumed. Other natural resources such as fossil fuels (Oil , Petroleum, Natural gas, Coal) are also used during manufacturing of products. But when we make products out of recycled materials we can reduce the use of energy sources. The steps in the process of manufacturing of recycled product is reduced which helps to save energy.

  • Incineration

    Incineration is one of the waste management technique  and disposal method to treat waste materials. Combustion of waste in the presence of oxygen is carried out by thermal treatment process. The waste is then converted into water vapour, carbon dioxide and ash, with he help of incineration treatment the quantity of waste products or garbage can be reduced significantly.

  • Processes involved in Recycling materials

    There are mainly four types of process involved in recycling materials. So let us check it out each process take place during recycling of any materials or products

    The first step is to collect recyclable materials such as paper, glass, aluminium, cans, plastic from communities. The recyclable materials are placed into separate bins and the bins also have the recyclable symbol on it. 

  • Educational Research

    Educational Research is the field of scientific study which starts with the process of identifying a research problem. Next is the process of reviewing various literatures available begins. Various data are collected from all the available resources and the information is analyzed and studied. After proper understanding of the given issue or topic , a report is generated which is evaluated and can be used in education.

  • Full Form of SAP

    SAP : Full Form is given below So Let us find out the full form of term SAP and other useful details to know more about SAP.

    1. SAP stands For "Systems, Applications and Products in Data Processing".

    SAP is related to ERP Where ERP stands for "Enterprise Resource Planning". 

  • SOP to WL terms

    The List of Abbreviations used in Pharmaceutical Industry

    Check out more information of related terms

    The last chapter of the list of abbreviations used in pharmaceutical industry is chapter number ten. Other important meaning and terms are given here. so check out all the terms one by one.

  • What are the Pros and Cons of Supply Chain Management ?

    Some of the Pros and Cons of Supply Chain Management are listed below. So let us find out brief information on pros and cons to learn more about supply chain management. It is the management of flow of services and goods and includes all types of process that transforms raw materials into final products. So  check out advantages and disadvantages of Supply Chain Management discussed below.

  • What is Planned economy ? Advantages and Disadvantages of Planned Economy

    Find out Advantages and disadvantages of planned economy (command economy) listed below. So let us check out points on advantages and disadvantages to know more about planned economy. This type of economy system is controlled by governement. In Planned economy, government decides how much is produces, what to produced, the methods of the production and the price of goods or services.

  • Benefits of Recycling

    Recycling is a process of waste management in which waste materials of plastic, paper, metal, aluminium, glass etc., are collected and are used to make new products. Recycling helps to protect the environment and saves energy and resources. 

  • Line Clearance

    Line clearance is the permission taken from the authorized QA person before starting actual production (Manufacturing, Filling and Packaging). 

    The line clearance includes:

    Manufacturing Area

    Filling Area

    Dispensing or packaging Area

    Purpose and Importance

    In line clearance the procedures have been established to prevent mix - up of containers, products, labels and mistakes in documents. MIx up and mistakes occurs when GMP are not followed.

    Particular take should be taken:

    When starting a new operation

    At change of shift

  • Definition of polymers

    Definition - Polymers are large molecules which are made of repeating units of molecules which are called as monomers.

    There are lots of applications of polymers in day to day life.

    The term polymer is derived from the greek work , In Greek terminology poly means many and meros means parts.

    To form polymers, the monomers are connected to each other with the help of covalent bonds and this process is called polymerization.

    Polymers is made up of either same type of monomer or different types of monomers.

  • Supply Chain Management Definition, Advantages and Disadvantages

    Definition of Supply Chain Management

    Supply Chain management can be considered as an effective tool for improving business process. It starts with the source of supply and competes at the point of consumption. Supply chain management is a flow of information and materials from suppliers which involves number of value added process and different distribution channels to the customers. 

    Supply chain management involves :

Trending Posts

Examples of Acids and Bases

Examples of Acids and Bases are as follows , so let us check it out some information on Acids and Bases to know more about it.

Examples of Acids are:

  1. Hydrochloric Acid
  2. Nitric Acid
  3. Sulfuric Acid
  4. Oxalic Acid
  5. Hydrophosphoric Acid
  6. Nitrous Acid
  7. Chloric Acid
  8. Bromic Acid
  9. Fluoric Acid
  10. Chromic Acid etc...........

Examples of Bases are:

Full Form of MOT,MBBS

Master of Occupational Therapy (MOT) is a professional degree program offered by various health care schools.(Other full form and meaning  of MOT are also available) So check it out other articles related to the given term.

MBBS - Bachelor of Medicine, Bachelor of surgery (Degree awarded by medical  school).